Materials

This weave works best using rings with an aspect ratio around 6.4 (after springback). This works out to:

• 14 ga. (.080) x .512 (about 1/2) I.D.
• 16 ga. (.062) x .397 (about 3/8) I.D.
• 18 ga. (.045) x .288 (about 1/4) I.D.
• 20 ga. (.032) x .205 (about 3/16) I.D.
• 22 ga. (.025) x .160 (about 5/32) I.D.
• 24 ga. (.020) x .128 (about 1/8) I.D.

Steps 1 - 7 require (18) rings.
Each step 8 requires another (8) rings.

Instructions

For this instruction set, new rings are gold and existing rings are silver.

	1. Make a 2-4 chain.
	2. Move the 2 center rings to the left.
	3. Add on a 2-2 chain.
	4. Move the newly added rings to the left and scrunch them together as shown.
	5. Add a ring (through 6 existing rings).
	6. Same as step 5, but on the opposite side.
	7. Add 2 rings.
	8. Same as step 3.
	9. Same as steps 4, 5 and 6.
	10. Keep on repeating steps 7 through 9 until the chain is as long as required.

You're done!

Questions or comments? Email me at mailler@zlosk.com.